■
External speaker jack
The KCB-3000 mobile is equipped with a 3.5 mm so-
cket at the rear panel to connect an external speaker
of 4-8 ohm impedance. At 4 ohms the speaker load can
be 4 watts maximum. When the external speaker is
connected, the internal speaker of the radio is muted.
■
Frontpanel
1 - Volume control with Power-On-Off
2 - COL/DIM-Key
3 - LC-Display
4 - VOX/LOCK-Key
5 - UP-Key
6 - SQ/ASQ control
7 - Socket for speakermicrophone
(Kenwood standard)
An external loudspeaker or earphone can also be
connected individually to the 2.5 mm jack socket.
Please pay attention to the load capacity of the
loudspeaker/earphone and only set a low vo-
lume.
8 - Loadspeaker
9 - DOWN-Key
10 - MODE/BAND-Key
11 - Socker for handheld microphone
12 - 9·19 Channel switch / SCAN-Key
■
Keys on the VOX microphone
1 -
PTT key
2 -
channel UP
3 -
M key
4 -
channel DOWN
PREPARATIONS FOR OPERATION / KNOBS AND KEYS
1
2
4
3
6
