15
Hakki Pilke 38 Easy
Original
Version 6
3.2.4.
Using the output conveyor
The belt of the Hakki Pilke 38 Easy log splitter’s output conveyor is driven by a hydraulic motor. To change
the speed of the belt, use the adjuster G shown in Figure 10. The following describes how the conveyor can
be turned laterally by using the turning lever A and handle B:
Figure 19.
Release the lock of the conveyor by pushing the lever A towards the conveyor, and turn the conveyor to the
desired position with the handle B.
3.2.5.
Adjusting the splitting blade
The splitting blade can be controlled hydraulically by moving the control lever E in Figure 10 up or down.
Logs should always be as centred as possible when passing the blade in order to keep the size of the
firewood consistent.
The blade can be driven to the lowest position by raising the blade and clearing the space under the blade.
The machine must be shut down and disconnected from its power source for the duration of the cleaning.
3.2.6.
Using the dust collector
A hydraulic dust collector is available as an accessory for the splitter. It allows you to collect sawdust for any
purposes you may wish to use it. The dust collector is automatically activated when the machine starts up.
