18
Hakki Pilke 38 Easy
Original
Version 6
4.3.3.
Using the quick couplings of the additional hydraulics
Connect the additional hydraulics (for example Connect the additional hydraulics (for example when using
the WoodLift 381 log hoist) by pushing the hydraulic hoses of the auxiliary device to quick couplings C and D
(please see Figure 20 in Section 4.3.4).
4.3.4.
Using the quick couplings of the auxiliary feed rollers
The auxiliary feed rollers can be connected in series with the input conveyor. This way, the rollers are
automatically synchronised to operate with the input conveyor when feeding logs with the joystick F.
1.
Connect the hoses of the auxiliary
rollers to quick couplings C and D
in the Figure 20.
2.
Remove the guard as instructed in
the instructions of point 2 of
Section 4.4.4.
3.
Turn ON the cock A in Figure 21
with the handle B, which allows oil
to flow to the quick couplings
shown in Figure 20.
4.
Make sure that the rotation
direction of the rollers is the same
as the conveyor’s direction. If
necessary, change the connections.
Note! Cock A must be closed (as in
Figure 21) whenever the quick
couplings C and D in Figure 20 are
not in use!
-{}-
Figure 20.
Figure 21.
C
D
A
B
A
