info@maaslandgroep.nl
www.maaslandgroep.nl
13
260123
7.4 OPBOUW MONTAGE (GLAS)
1. Fitting the housing
Clean the glass surface with isopropyl alcohol and peel the protective layer from the
double sided tape of the housing. Position the housing flush with the edge of the glass,
and press down to adhere tape to surface.
2. Fitting the dress plate
Clean the glass surface with isopropyl alcohol and peel the protective layer from the
double sided tape of the dress plate. Position the dress plate flush with the edge of the
glass and centered on the housing location, and press down to adhere tape to surface.
3. Fitting the strike plate
The strike is then placed into the housing and then secured in place with M5 machine
screws (included with housing). Ensure the strike is oriented so that the bolt hole aligns
with the lock bolt.
ELEKTRISCHE SLOTEN