Control Systems
California Cooperage® Series Control
System
The California Cooperage® Series Control System
offers you the ultimate in spa control. The LED window
displays current water temperature, set point water tem-
perature, and operating mode settings. Each feature of
the system is actuated through a control panel touch
pad. Touch the appropriate pad to activate the desired
function.
At start up, when power is supplied to the spa, the con-
trols will operate properly and safely under the factory
settings. The spa will be in
Economy
Mode, have a tem-
perature setting of 100°F, and a filtration cycle duration
of 2 hours. To fully utilize the unique capabilities of the
control system, it is important to know how to set the
temperature, operate the pumps, operate the light, adjust
the mode setting, and change the filtration cycles.
User’s Pads
User’s Pads are the buttons located on the topside
control panel and are used to program various spa
functions (i.e., turn on spa light, set temperature,
etc.). The following table defines the pads:
10
The California Cooperage®
Model 167 Control System is
used on Spa Modes 106 and 107.
The California Cooperage® Model
165 Control System is used on Spa
Models 103, 104 and 105.
