10
10
Swim Spa
SWIM SPA SYSTEM COMPONENTS
A. Filter Skimmer/Weir:
Removes
floating debris from the water surface,
provides a water return path to equipment,
and houses water filter elements.
B. Topside Control Panel:
Used to control
temperature setting, jet pumps, circulation
system, underwater lights and ambient
effect lighting.
C. Air Controls:
Increases or decreases air
entering the jets. Close during heating
for maximum efficiency. It is recom-
mended that air controls to the swim jets
remain closed during swimming to provide
a clearer stream of water which is free from
air bubbles.
D. Equipment Pack Service Panel (no user
serviceable parts):
Spa support system
consisting of several of the following
devices: electronic control pack,
pumps, heater, UV water sanitizer, ozone
generator, LED lighting interface
and associated electrical controls (not
shown).
E. Drain Access (Adjacent to the equipment
service panel):
Drain faucets
are located immediately behind the front
door panel. Remove panel to access (not
shown).
F. Manufacturer’s Identification Label:
Contains identification information for
warranty service (serial number, model
number, etc.) and electrical information
(ampere rating and ampere requirements).
Located on the lower right side of the front
door panel (not shown).
G. Diverter Valve:
Used to direct the flow
of water between the massage jets in
the hydrotherapy seats and the swim
jets. By turning the diverter valve
clockwise, the water is directed to the
massage jets in the hydrotherapy seats and
by turning the diverter jet counterclockwise,
the water is directed to the swim jets.
A
B
C
G
Summary of Contents for DT6
Page 54: ...54 54 Swim Spa NOTES...
