9
9
PowerPool
™
POWERPOOL™ SYSTEM COMPONENTS
A. Filter Skimmer/Weir Door:
Removes
floating debris from the water surface,
provides a water return path to equipment,
and houses water filter elements.
PowerPool™ Sport and Pro models utilize
2 Filter Skimmers and the PowerPool™
SuperSport model utilizes 3 Filter Skimmers.
B. Topside Control Panel:
Used to control
temperature setting, jet pumps, circulation
system, underwater lights and ambient
effect lighting. PowerPool™ Sport and Pro
models utilize one topside control panel.
The PowerPool™ SuperSport model utilizes
two topside control panels, one for the hot
tub portion and one for the swim area.
C. Air Controls:
Increases or decreases air
entering the jets. Close during heating
for maximum efficiency. It is recom-
mended that air controls to the MAAX®-
Force swim jets remain closed during
swimming to provide a clearer stream of
water which is free from air bubbles.
D. Equipment Pack Service Panel (no user
serviceable parts):
Spa support system
consisting of electronic control pack,
pumps, heater, UV water sanitizer, plasma
UV ozone generator, LED lighting interface
and associated electrical controls (not
shown). The PowerPool™ Sport and
Pro models feature one control pack,
three jet pumps, one UV sanitizer, one
plasma UV ozone generator and one LED
lighting interface. The PowerPool™
SuperSport model features two independent
electronic control packs, four jet pumps,
two UV sanitizers, two plasma UV ozone
generators and two LED lighting interfaces.
E. Drain Access (Adjacent to the equipment
service panel):
PowerPool™ drain faucets
are located immediately behind the front
door panel. Remove panel to access.
F. Manufacturer’s Identification Label:
Contains identification information for
warranty service (serial number, model
number, etc.) and electrical information
(ampere rating and ampere requirements).
Located on the lower right side of the front
door panel.
G. Diverter Valve:
Used to direct the flow
of water between the massage jets in
the hydrotherapy seats and the swim
jets. By turning the diverter valve
clockwise, the water is directed to the
massage jets in the hydrotherapy seats and
by turning the diverter jet counterclockwise,
the water is directed to the swim jets.
