-5-
10023064
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
Note: The range of the air control knob
from fully open to fully closed is 3/4 of
a complete revolution.
Step 9:
Step 10:
Figure 5 - Air Control Operation
Turn counter-clockwise to
increase water action.
Turn clockwise to
reduce water action
Thin line
,
less air
Thick line
,
more air
Figure 6 - On / Off Button
Gently press button
and release to start
or stop system.
Figure 9 - Side Jet Flow Control
Rotate nozzle either direction
until desired flow rate is reached.
Figure 10 -
SELECTAFLOW
™
Control
Rotate knob to achieve desired flow
setting. (High-Medium-Low)
Figure 7 - Side Jet Directional Control
Move jet nozzle to
desired direction
Figure 8 - Foot Jet Flow Control
Rotate center 1/2 turn
counter clockwise to
open jet.
Rotate center
1/2 turn clockwise
to close jet.
Bodywrap Whirlpool System
Assembly And Operation Guide
To adjust directional flow of any
side jet, move the jet nozzle to
the desired position as shown in
Figure 7.
To change the whirlpool action
during the system operating cycle,
adjust air control knobs. Opening
(turning counterclockwise) the air
control allows more air to be mixed
with the water coming out of the
jet nozzle for increased whirlpool
action. Closing (turning counter-
clockwise) the air control reduces air
at the jet for less whirlpool action.
(See Figure 5).
The micro pulse back jets are
adjusted from only one of the air
control knobs.
To change (increase or decrease)
the flow of the foot or side jets(s),
rotate the jet internal section
clockwise or counterclockwise
until desired flow is reached.
(See Figures 8 & 9).
Due to the size of the micro pulse
back jets, no flow adjustment is
provided. Pulse action of the back
jets are adjusted by the air control
settings.
Overall system flow can be adjusted
with the
SELECTAFLOW
knob by
turning to the High, Medium or Low
setting (see Figure 10).
Drain and thoroughly rinse the tub
and flush the whirlpool system after
each use to help reduce the buildup
of soap scum or body oils in the
system supply lines. Follow the care
and cleaning recommendations
listed in this guide.
TM
