fig. 3
fig. 1
PUMP
Essence - S Designer - S Classic - S
Our commercial quality pump is the heart of your whirlpool system. The pump
is positioned on a specially designed cantilevered mounting base. It helps isolate
and dampen vibration and noise, adding to your comfort and pleasure.
The
pump can (at times) take a minute or two to prime and begin water circulation.
PATENTED WHIRLPOOL JETS
Essence - S Designer - S Classic - S
Pearl Whirlpool Bathtubs are not ordinary jetted tubs. Jet location in our tubs is
designed to give you the very best in whirlpool bathing. Shown in fig. 1 is our
Venturi jet. The nozzle is directionally adjustable and turns
over a 30° range.
AIR VOLUME CONTROLS
Essence - S Designer - S Classic - S
Each jet is moving approximately 30 gallons of water per minute. The more air
that is introduced into the flow of water, the deeper the massage. The amount of
air is regulated by the air control knobs. Two air controls, (as shown in fig. 2) are
located inside the tub. One knob controls a single jet. The other controls one or
two whirlpool jets, depending on your model.
Do not fill the tub above the air controls or overflow.
PATENTED SAFETY SUCTION RETURN SYSTEM
Essence - S Designer - S Classic - S
This fitting allows water to return from the tub to the pump. The protective lou-
vered screen prevents foreign objects from entering the pump.
Do not use the
whirlpool bath if protective cover is missing. Do not remove the protective
louvered cover
(fig. 3). Keep the cover of the return fitting clean. An obstructed
cover reduces the whirlpool action and may cause damage to the pump. To clean,
remove any hair or debris and wash cover with a soft brush and soap. If block-
age occurs, such as a foot, or hand too close to the return fitting, the pump instant-
ly disengages and stops the whirlpool action until the obstruction is removed.
Please do not be alarmed. This is a safety feature designed for your protection.
BACK MASSAGE SYSTEM/COMFORT PACKAGE
Essence - S Designer - O* (Selected Models) Classic - O (Selected Models)
* Not available with PearlAir System
Comprised of six rotating jets on ES and DS (8 on the Andorra), and four rotating
jets on the CS, these ergonomically positioned jets provide a stimulating massage
action to those sore tired muscles. The intensity of these rotating jets can be
adjusted by turning the diverter valve located on the side of the bath (fig. 4).
PEARLAIR
TM
SYSTEM
Essence - NA
Designer - O* (Selected Models) Classic - NA
* Not available with Back Massage System
Comprised of 10-14 air injectors (depending on the size of the whirlpool) these
strategically placed bottom air jets provide a stimulating massage action. The
system features a variable speed blower.
3
fig. 2
PEARL WHIRLPOOL BATH SYSTEM
Series-S (Standard Feature) O (An Option) NA (Not Available)
Off Position
Note: 1/4 turn to open
back massage jets
fig. 4
