8
Consumer Support
Troubleshooting T
ips
Operating Instructions
Safety Instructions
Installation
Instructions
Care and Cleaning
Reversing the Door Swing.
Remove the top hinge assembly and keep it aside for later use.
Remove the bottom hinge assembly and keep it aside for later use.
Remove the plug buttons from the upper left holes and transfer them to
the holes uncovered by removing the top hinge assembly. Be sure to press
the plug buttons firmly into place.
Re-install the top hinge assembly on the opposite side.
Re-install the bottom hinge assembly on the opposite side.
Rotate the door assembly as shown so the handle is on the opposite side.
Make sure the door assembly is properly aligned to the cabinet before
tightening the screws.
Once complete, stick on GE logo on top right hand corner of the door.
The process is now complete.
2
3
4
5
6
7
Consumer Support
CAUTION:
To avoid personal injury and/or property damage, it is
recommend that more than 1 person be used to complete this process
8
