37
Instructions for the installer
Installation
This appliance is not provided with a com-
bustion product discharge. It is recom-
mended that it be installed in sufficiently aer-
ated places, in terms of the laws in force. The
quantity of air necessary for combustion
must not be below 2.0 m³/h for each kW of
installed power.
See table of burner power.
Installation
Fig. 3. The appliance can be fitted into a
working area as illustrated on the corre-
sponding figure. Before positioning the hob,
fit the seal (indicated with an "X") around the
entire periphery of the cutout in the worktop.
Gas hookup
Fig. 5. Connect the appliance to the gas cyl-
inder or to the installation according to the
prescribed standards in force, and ensure be-
forehand, that the appliance matches the
type of gas available. Otherwise, see "Adap-
tation to various types of gas". Furthermore,
check that the feed pressure falls within the
values described on the table: "Specifica-
tions".
Figura 5
Rigid/semi rigid metal connection
Carry out the connection with fittings and
rigid (or flexible) metal pipes. Avoid stressing
the inner parts of the appliance.
Note: After completing the installation, check
the perfect sealing of the entire connection
system, by using a soapy solution.
Gas Type by Country
Mexico
Set for L.P. gas, and includes a
conversion kit for Natural gas.
Set for Natural gas, and in-
cludes a conversion kit for L.P.
gas.
Set for L.P. gas, and includes a
conversion kit for Natural gas.
Set for L.P. gas, and includes a
conversion kit for Natural gas.
Argentina
Brazil
Colombia
