Air Regulator
Regulator Position
General Temperature Control
Position
When to Use
Medium
Recommended for normal use
Hot days
Many foods stored
Frequent opening of doors
Maximum
Minimum
63
IMPORTANT
Minimum
Maximum
Turn the knob towards “Minimum”
for less chill or towards “Maximum”
for greater chill.
Cold days
Few foods stored
Infrequent opening of door
NOTE: For some models the temperature control is located on the exterior
control or display. If your model has an external control or display,
see page
64
to understand how it works.
Freezer Temperature
Cooler Temperature
No variation
Least cold
Suggested
Coldest
Changing the position of the air regulator will alter the time it takes the cooler to
reach the correct temperature but not the temperature itself.
shelves provided to hold everything. This will facilitate the necessary air
circulation and prevent it from lower performance.
The refrigerator control has temperature graduations for both compartments that vary from minimum
(least cold) to maximum (coldest). If needs be, adjust the control and monitor the food for a couple of hours.
You can readjust it until you obtain the desired refrigeration level. You will have to wait between 4 and 6
hours until the refrigerator reaches the selected temperature.
Your refrigerator has an additional control that regulates the air
flow between the freezer and the cooler. It’s calibrated in the
factory to ensure optimum function, so we recommend you don’t
alter its position.
If you wish to adjust it, put a coin into the central slot. By turning it
to the right you’ll generate greater air flow to the freezer,
accelerating the freezing process. However, you’ll notice that the
cooler will take longer to reach the correct temperature.
By turning the control to the left, the air flow to the cooler will
increase, delaying the freezing process according to the following
guide:
