1
2
before connecting your refrigerator
general instructions
Remove the bases, packaging and accessories. Remove
the adhesive tape residue with a cloth soaked in water
and neutral soap.
Choose the location of the refrigerator. This area should
be kept clean and dry to avoid rust.
placement
Allow the following minimum space to ensure adequate
air circulation, especially if the appliance is going to be
fixed to the wall: 2 to 3 cm on each side, 10 cm at the
back and 5 to 10 cm on top.
Do not install the refrigerator near heat sources like
stoves, radiators, or in direct sunlight, as this will cause
it to overwork and be less efficient, there by increasing
its consumption of electrical energy.
Do not lean it against a wall. By complying with this, you
will be ensured of the correct positioning of the product,
preventing your refrigerator components from directly
coming into contact with walls or furniture, thereby
avoiding disagreeable noise.
leveling
Use the two leveling screws to level the refrigerator.
Insert and adjust them so that they rest firmly on the
floor.
The front of the refrigerator should rest a little higher
than the rear which should lean slightly backwards,
thereby facilitating the automatic closing of the doors
and preventing temperature loss.
installing your refrigerator
installation
Before inserting the plug into the AC outlet, clean the
interior of your refrigerator using a cloth or soft sponge
and mild soap, or a solution of bicarbonate of soda and
water. Do not use toxic or abrasive products.
1
2
3
28
1
2
3
Summary of Contents for RM62W04EX
Page 2: ......
