To adjust the position of your half shelves, lightly lift the
front of the shelf and slide it forward until it rests loosely
on the support points; when it is approximately half way
to these points, shift the shelf to the side.
The placement of the half shelf is similar: introduce it to
approximately the mid-point of the refrigerator, rest it
against the side of the refrigerator and push backwards
until it rests on its support points.
The shelf is not completely horizontal, it is slightly raised
in the center so that when heavy objects are placed on it
it levels out - this is completely normal. The maximum
recommended load for this shelf is 8 kg (17.6 lb).
removable freezer base
Only certain models come equipped with a removable
base.
The freezer base can be removed to facilitate cleaning if
liquid spillage occurs.
To remove the base, pull it towards you.
Do not let liquids and objects fall against the interior air
vent.
For your refrigerator to run well, ensure that the base is
always in its correct position; after cleaning, replace the
base by sliding it smoothly into place.
door bins
Depending on its model, your refrigerator comes equipped
with a double deep door (which is the largest on the
market), and some of the following shelves (depending
on the model):
slide-out bins
Some models have slide-out bins which allow greater
versatility of internal storage and distribution. To move
the slide-out bins, gently slide them into the desired position.
Remove any foods which may be stored on them to avoid
their falling over during the adjustment.
1
2
1
2
34
Summary of Contents for RM62W04EX
Page 2: ......
