18
Electrical requirements
WARNING: DO NOT REMOVE GROUND PRONG.
DO NOT USE ADAPTER. DO NOT USE EXTENSION
CORDS. FAILURE TO FOLLOW THESE INSTRUC-
TIONS COULD RESULT IN DEATH, FIRE OR ELEC-
TRIC SHOCK.
Before you move the unit to its final location, it is important to
make sure you have the proper electrical connection.
recommended grounding method
• A 220~240 Volt/50 Hz AC only 10 Ampere fused and properly
grounded electrical supply is required.
• It is recommended that a separate circuit serving only this appli-
ance be provided.
• Use a receptacle which cannot be turned off with a switch or pull
chain.
• Do not use an extension cord.
NOTE:
Before performing any type of installation, disconnect the re-
frigerator from the electrical source. When you are finished, connect
the refrigerator to the electrical source and set the control in the de-
sired position.
leveling the unit
If the refrigerator is not leveled during installation, the doors may
not close or seal properly, causing cooling, frost, or moisture prob-
lems. It is very important for the refrigerator to be level in order to
function properly.
To level the refrigerator you may either turn a leveling leg clockwise
to raise that side to the refrigerator or turn it counterclockwise to
lower that side.
NOTE:
Having someone to push against the top of the unit will take
some weight off the leveling legs. This makes it easier to adjust the
leveling legs.
Summary of Contents for RMC275PURB0
