background image

14

• Let hot foods cool down to room temperature before placing

them into the appliance. Overloading the appliance forces the
compressor to run longer. Foods that freeze too slowly may lose
quality, or spoil.

• Be sure to wrap foods properly, and wipe containers dry before

placing them in the appliance. This cuts down on frost buildup in-
side the appliance.

• Appliance storage bin should not be lined with aluminum foil, wax

paper, or paper toweling. Liners interfere with cold air circulation,
making the appliance less efficient.

• Organize and label food to reduce door openings and extended

searches. Remove as many items as needed at one time, and close
the door as soon as possible.

9. disposal

Old units still have some residual value. An environmentally friendly
method of disposal will ensure that valuable raw materials can be
recovered and used again. The refrigerant used in your unit and in-
sulation materials require special disposal procedures. Ensure that
none of the pipes on the back of the unit are damaged prior to dis-
posal.

Up to date information concerning options of disposing of your old
unit and packaging from the new one can be obtained from your lo-
cal council office.

When disposing of an old unit, break of any old locks or latches and
remove the door as a safeguard.

correct disposal of this product

This marking indicates that this product should not be dis-
posed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources.

To return your used device, please use the return and collection sys-
tems or contact the retailer where the product was purchased. They
can take this product for environmental safe recycling.

For more information, please contact the local authority or your re-
tailer where you purchased the product.

Summary of Contents for RMI1851XSAB0






































Reviews: