87
w
a
t
e
r
dis
p
ense
r
(only available with certain models)
manually. You can obtain cold water from the outside of the refrigerator, saving
energy use.
h
o
w
t
o s
t
a
rt
once every 30 days never employing the use of detergents or odorous cleaning
products. The tank has a lock (
*
) on the back that guarantees its position and
ensures water is dispensed correctly.
removing the tank:
Turn the lock clockwise.
1.
Hold the tank from the sides and lift.
2.
Pull towards you to remove completely.
3.
putting the tank back:
Lock’s position must be as shown (
1.
*
)
(make sure it is turned to the left)
Hold the tank from the sides and slide
2.
the nozzle into the corresponding
opening on the door.
Push the tank -while lifting slightly- and make sure the side tabs are
3.
correctly mounted on the door.
Turn the lock to the right (while holding the back side of the tank)
note:
You will see a thin space between the shelf and the door cover, but
this is normal.
note:
system. It is important to put it back in a correct way. Seal tabs must be inside
of the inner tank wall as shown in the image so that it avoids spills.
im
p
o
rt
an
t:
Read the instructions before using.
•
The dispenser should only be used with pure drinking water. If it is used
•
with liquid tany other he manufacturer is not responsible for any damage
caused.
Remember to clean the inside of your refrigerator with a cloth or soft
•
sponge, and a neutral soap.
4
2
3A
1
3B
*
2
2
1
*
3
