MABIS SmartRead 04-182-001, Instruction Manual

13

Recalling Measurements in Memory

You can recall up to 90 measurements in memory. These measurements
can be shared with your physician or trained health care professional.

1. Press the MEMORY button. The last stored

measurement will display, 

Fig. 1

.

2. Continue to press the MEMORY button to view the

next previously stored measurement, 

Figs. 2-3

.

NOTE:

The memory bank can store up to 90 readings.

When the number of readings exceeds 90, the oldest
data will be replaced with the new record.

Fig. 2

Fig. 3

Fig. 1

12

4. The cuff will automatically begin to inflate, with

varying speeds of inflation.

5. The display will show the increasing pressure in the

cuff, 

Fig. 4

.

6. Upon reaching the optimum level, the display will

show the decreasing pressure, 

Fig. 5

7. The cuff will exhaust all air and your blood pressure

(systolic and diastolic) measurement and pulse
rate will display simultaneously, 

Fig. 6

.

8. Your reading will be automatically

stored in memory.

9. To conserve energy, press the

POWER button to turn the unit off.
Otherwise, the unit will automatically
shut off after approximately 1 minute.

10. Disconnect the tubing from the

monitor prior to storing.

Fig. 4

Fig. 6

Fig. 5