5
13.
Avoid powder contamination
.
- Protect your lungs by using an approved dust mask.
- Never cure objects in an electric oven that is used for food also.
- Ventilate the area well.
- Wear an activated charcoal respirator when oven curing the coated object.
14.
People with pacemakers should consult their physician(s) before using this
product.
Electromagnetic fields in close proximity to a heart pacemaker could cause
interference to or failure of the pacemaker.
GROUNDING
WARNING!
Improperly connecting the grounding wire can result in the risk of electric shock.
Check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. Do not modify the power cord plug provided with the tool or
product. Never remove the grounding prong from the plug. Do not use the tool if
the power cord or plug is damaged. If damaged, have it repaired by a service
facility before use. If the plug will not fit the outlet, have a proper outlet installed
by a qualified electrician.
Grounded Tools with Three Prong Plugs
The Powder Coating System comes with a 3-prong grounded plug.
1.
Tools marked with "Grounding Required" have a three wire cord and three prong
grounding plug.The plug must be connected to a properly grounded outlet. If the tool
should electrically malfunction or break down, grounding provides a low resistance
path to carry electricity away from the user, reducing the risk of electric shock. (See
Figure A on the next page.)
2.
The grounding prong in the plug is connected through the green wire inside the cord
to the grounding system in the tool.The green wire in the cord must be the only wire
connected to the tool's grounding system and must never be attached to an
electrically "live" terminal. (See Figure A.)
Summary of Contents for TPOWDR-001
Page 14: ...13 ASSEMBLY DRAWING ...
