Fig. 1b
Fig. 1c
Fig. 2
30
30
31
30
24
29
29
32
32
29
32
13
2
32
29
30
24
24
42
41
16
29
To assemble the rear extension table
> Align the holes on rear extension table [16] with holes on the back of the working
table [24].
> Position the rear extension table [16] with flat washers 6 [29], spring washers 6
[30] and hex bolts M6 x 16 [32].
> Attached the left/right extension tables [13,2] to the working table [24] with flat
washers 6 [29], spring washers 6 [30] and hex bolts M6 x 16 [32]. (Fig. 1b-1c)
> Attached the hose hold [18] to the right extension table [2] with flat washers 6 [29],
spring washers 6 [30], hex bolts M6 x 16 [32] and hex nuts M6 [31]. (Fig. 1c)
Before you start
MSTS1500-A
by
MacAllister
Getting
started...
23
EN
NOTE:
Only one hole [42,41] on the side of the extension tables
must be in the front after finished.
