40
41
MLMP475iSSP46-M&S-2
MLMP475iSSP46-M&S-2
In
more
detail
. . .
In
more
detail
. . .
Maintenance table with schedules
Part
T
o
do
Before/
after
each
use
First
month
or
5 hours
Every
3 months
or
25 hours
Every
6 months
or
50 hours
Every
year
or
100 hours
Every
2 years
or
250 hours
Engine oil
check
x
replace
x
$LU¿OWHU
check
x
clean
x
replace
x
Spark plug
check/adjust
x
clean
x
replace
x
Spark plug cap
c
lean
x
Fuel tank
clean
x
Fuel tube
clean
Every 2 years (replace if necessary)
Cutting means
replace
Replace the cutting means (29) after 50 hours of mowing, or 2 years whichever is
sooner regardless of condition.
Battery
charge
x
1. Keep the product clean. Remove debris after each use and before storage.
2. Regular and proper cleaning helps to ensure safe operation and prolongs the life
of the product.
3. Inspect the product before each use for worn and damaged parts. Do not operate
LWLI\RX¿QGEURNHQDQGZRUQSDUWV5HSODFHZRUQSDUWVDVQHFHVVDU\RUFRQWDFW
an authorised service centre for repair before using the product again.
WARNING!
Only perform repairs and maintenance work according to these
LQVWUXFWLRQV$OOIXUWKHUZRUNVPXVWEHSHUIRUPHGE\DTXDOL¿HGVSHFLDOLVW
Cleaning
1. Clean the product with a slightly damp cloth and mild soap. Use a brush for areas
that are hard to reach.
2. In particular, clean the air vents (11) after every use with a cloth and brush.
3. Remove stubborn dirt with high pressure air (max. 3 bar).
4. Clean the underbody and cutting means (29) using the water hose connector (14).
NOTE:
Do not use chemical, alkaline, abrasive or other aggressive detergents
or disinfectants to clean this product as they might be harmful to its surfaces.
Maintenance
Before and after each use, check the product and accessories for wear and damage.
If required, exchange them for new ones as described in this instruction manual.
Observe the technical requirements.
WARNING!
It is required to tip the product when performing the maintenance.
7KHIXHOWDQNPXVWEHHPSW\RUIXHOFDQOHDNZKLFKFRXOGUHVXOWLQ¿UHRU
explosion.
NOTE:
Always empty the fuel tank and keep the spark plug upside down.
2WKHUZLVHWKHIXHORUHQJLQHRLOPLJKWFRQWDPLQDWHWKHDLU¿OWHU
(13a)/spark
SOXJDQGPLJKWPDNHLWGLI¿FXOWVWDUWWKHHQJLQH
After use
1. Stop the engine, disconnect the spark plug connector (15) and let the product cool.
2. Check, clean and store the product as described in the maintenance table.
Care and maintenance
Care and maintenance