17
02
Grass catcher
Empty the grass catcher frequently during use. Do not wait until it is completely full.
To empty the grass catcher follow these steps:
1. Lift the rear deflector guard and pull the grass catcher off the rod.
2. Remove the grass clippings from the rear discharge chute into the grass catcher. Use a proper tool such as a brush.
3. Remove the grass catcher.
4. Empty the grass clippings onto a compost heap.
5. Re-fit the grass catcher to the product.
WARNING!
Never use your hands or feet to remove grass
clippings from the discharge chute.
WARNING!
Do not attempt to use the product without the
grass catcher attached when collecting grass – danger of
flying objects!
Switch the engine off and wait that the blade has come to a
complete stop before removing the grass catcher.
03
Cutting height adjustment
Adjust the cutting height according to the needs of your lawn.
The cutting height depends on the kind of lawn and its actual
height. When mowing high grass, start with the maximum cutting
height and make a second cut with lower cutting height.
1. Pull the lever (15) towards the wheel (12), then move it
forward or backward to adjust the cutting height.
15
12
WARNING!
Ensure that the lever engages between the two of
the prongs! Switch the engine off and wait that the blade had
come to a complete stop before adjusting the cutting height!
