6
• Make sure that the air intake of the combustion engine is clear. Keep the air intake free of dust, dirt particles, gases and fumes.
Keep hands and feet away from the cutting device at all times and especially when switching on the engine.
04
Maintenance and storage
• Follow the maintenance and repair instructions for this product. Never carry out any modifications of the product. Never change
the preset rotary speed or the engine and product settings. Information about maintenance and repair is provided in this
user manual.
• Keep all nuts, bolts and screws tight to be sure the product is in safe working condition.
• Improper maintenance or using non genuine parts may lead to malfunction/failure of the product. Many accidents are caused by
poorly maintained products.
• Never store the product with petrol in the tank inside a building where fumes can reach an open flame or spark.
• Allow the engine to cool before storing in any enclosure.
• Keep the engine, silencer and petrol storage area free of grass, leaves, or excessive grease to reduce the fire hazard.
• Check the grass catcher frequently for wear or deterioration.
• Replace worn or damaged parts for safety.
• If the fuel tank has to be drained, this should be done outdoors.
• Wear strong work gloves when removing and re-assembling the cutting device.
• Always replace worn or faulty parts with the genuine parts. Only use the recommended blades and spare parts by
the manufacturer.
05
Fuel handling
• Always switch the product off and let it cool down, before refuelling it. Petrol is highly flammable. Never smoke when you are
refuelling the product. Do no refuel the product, if there is an open fire in the vicinity!
• Always use suitable aids such as funnels and filler necks. Do not spill any fuel on the product or its exhaust system. There is a risk
of ignition. However, if fuel should be spilled, the you must remove it carefully from all parts of the product. Any residue which may
be present must be completely removed, before the product is operated!
• Exhaust gases and fuel fumes are noxious. Fuel fumes can ignite. Never use the product in environments where there is a risk
of explosion.
• Never breathe in any fuel fumes, when you are refuelling the product. Never fill the tank in enclosed spaces, such as basements
or sheds. There is a risk of poisoning and explosion!
• Avoid skin contact with petrol.
• Do not eat or drink, while you are refuelling the product. If you have swallowed petrol or oil, or if petrol or oil has got into your
eyes, then seek medical advice immediately.
• Close the tank lid immediately after filling the tank. Make sure that it is properly closed.
• Never use the product without an air filter.
06
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of operation, use low-vibration and low-noise operating modes
as well as wear personal protective equipment.
Take the following points into account to minimize the vibration and noise exposure risks:
• Only use the product as intended by its design and these instructions.
• Ensure that the product is in good condition and well maintained.
• Use correct attachments for the product and ensure they are in good condition.
• Keep tight grip on the handles/gripping surface.
• Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate).
• Plan your work schedule to spread any high vibration tool use across a longer period of time.
