20
21
MLMP475iSSP46-M&S-2
MLMP475iSSP46-M&S-2
Getting
Started . . .
Getting
Started . . .
Grass catcher installation
NOTE:
Always carry the grass catcher (25) by its handle (25a).
1.
/LIWWKHUHDUGHÀHFWRUJXDUGDQGKROGLWLQSODFH)LJ
2. Align the hooks of the grass catcher (25) with the rods and hang them onto.
3.
&DUHIXOO\UHOHDVHWKHUHDUGHÀHFWRUJXDUGDIWHUZDUGV
25a
25
6
24
5. Unfold the upper handle bar (4) and hold it with the brake clutch (3) facing upwards.
Align the mounting holes of the upper handle bar (4) and the lower handle bar (5)
)LJ0DNHVXUHWKHZLUHVFRUG¿[LQJLQKRRNRIWKHKDQGOHVXSSRUW
3
5
4
3
6. Fix the upper handle bar (4) to the lower handle bar (5) with the side levers (8),
washers (8a) and bolts (8b) through the mounting holes (Fig. 4). Screw in the
side lever (8) clockwise and lock by folding up towards the handle. If side lever
(8) cannot be folded, loosen and fold again (Fig. 5). If it is too loose, tighten it by
swinging the side lever (8).
NOTE:
'RQRWRYHUWLJKWHQWKHVLGHOHYHUV,ILWLVGLI¿FXOWWRORFNWKHVLGH
lever (8), rotate it in the opposite direction to loosen the connection.
8
4
5
8a
8b
Before you start
Before you start
