22
23
MLMP475iSSP46-M&S-2
MLMP475iSSP46-M&S-2
Getting
Started . . .
Getting
Started . . .
1.
sheet under the product.
2. Unscrew and remove the fuel tank cap (12) (Fig. 7).
7
12
3. Add suitable fuel into the fuel tank. Leave a minimum 5 mm of space between
the top of the fuel and the inside edge of the tank to allow for expansion (Fig. 8).
4. Wipe any spilt fuel with a soft cloth and reattach the fuel tank cap (12).
NOTE:
you use petrol which has been kept for more than few days. Empty the fuel
after every use. Run the product dry of fuel in idle before storage.
NOTE:
to spill any fuel. Damages caused by spills are not covered by the guarantee.
Fuel and engine oil
This product is equipped with a 4-stroke engine. Before operation, it is necessary to
add suitable fuel and engine oil separately.
WARNING!
This product contains a separate operator’s manual for the
engine. Service the engine with proper petrol and engine oil as instructed in
the separate operator’s manual of the BRIGGS&STRATTON engine (35).
It is important to read and understand these instructions of the engine and
the equipment.
SAVE THESE ORIGINAL INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING!
>
>
Always dispose of fuel, used oil and objects contaminated with them in accordance
with local regulations.
Fuel
NOTE:
This product is not supplied with fuel! Before operating, it is essential
>
Always use clean, fresh unleaded petrol. Purchase fuel in quantities that can be
used up within 30 days.
>
Avoid getting dirt, dust or water in the fuel tank.
Before you start
Before you start
5 mm
8
