28
WARNING!
free of high grass! Clean the underside of the deck!
Keep yourself ready! The product will start moving forward
once you hold the drive bar towards the handle!
Start the engine carefully according to instructions. Keep your
feet well away from the blade!
Do not tilt the product when starting the engine!
Before starting, check if the starting key is inside the starting
button (22). If not, insert the starting key into the button.
Cold start / warm start
• Check the engine oil and fuel.
• Attach the battery pack to the engine.
NOTE:
charge of approximately 10 seconds is required.
• Stand behind the handle (1).
• Pull the brake bar (2) against the handle (1) and hold it in position with one hand (Fig. 17, step 1).
• Press the START button (24). Press it for several times, if necessary, until engine starts (Fig. 17, step 2).
• When you are ready to mow, hold the handle (1), keep the brake bar (2) squeezed and then pull the drive bar (3) towards the
handle (1) (Fig. 17, step 3). The product starts moving forward and begins mowing.
Fig. 17
START
START
1.
3.
2.
2
3
1
24
29
NOTE:
If the engine does not start, the engine may be
at the wrong time and can prevent a product from starting.
Follow below procedure:
Remove the spark plug (14a) (see the separate engine
handbook) and dry the spark plug. Pull the brake bar against
the handle and hold it in position. Then press the START
button (24) for several times to drain the fuel from the
combustion chamber.
spilled fuel and move the product at least 3 metres (10’) away
the engine to cool down then start the product as described in
section “Cold start / warm start”.
Stopping
Release drive bar
Release brake bar
• Release the drive bar (3) to stop the self-propelled function (Fig. 18, step 1).
• Release the brake bar (2) to stop the engine and blade (Fig. 18, step 2).
Fig. 18
START
1.
2.
2
3
