38
27a
27b
27c
27d
27
27e
27f
Grass catcher
•
• Clean the grass catcher (20) after operation using water and mild soap.
• Let the grass catcher dry thoroughly before storing to avoid mildew.
Wires and electric cord
Check the performance of the wires (5, 6) and electric cord (23) before each use.
WARNING!
Do not use the product with defective or loose
wires / electric cord!
Engine
NOTE:
An instruction manual of the engine is provided with
your product. Follow the engine handbook for maintenance
and care for of engine.
Refer to the B&S operator’s manual for maintaining below parts:
•
• Spark plug
• Fuel
• Engine oil
• Carburettor
•
• Valve play
• Battery pack / charger
Product cleaning
Clean the product with a dry cloth. Use a brush for areas that are hard to reach. In particular clean the air vents (10) after every use
with a cloth and brush. Remove stubborn dirt with high pressure air (max. 3 bar).
39
NOTE:
Do not use chemical, alkaline, abrasive or other
aggressive detergents or disinfectants to clean this product as
they might be harmful to its surfaces.
Check for worn or damaged parts. Replace worn parts as necessary or contact an authorised service centre for repair before using
the product again.
Spare parts / Replacement parts
The following parts of this product may be replaced by the consumer. Spare parts are available at an authorised dealer or through
our customer service.
Description
Spark plug (14a)
XC92YC
Blade (27)
DAYE 263001465
Charger (30)
IS12C
Battery pack (31)
IS12B
Repair
This product does not contain any parts that can be repaired by the consumer. Contact an authorised service centre or a similarly
Storage
Switch the product off and disconnect the spark plug connector / remove the battery pack.
Clean the product as described above.
Store the product and its accessories in a dark, dry, frost-free, well-ventilated place.
Always store the product in a place that is inaccessible to children. The ideal storage temperature is between 10 °C and 30 °C.
We recommend using the original package for storage or covering the product with a suitable cloth or enclosure to protect it
against dust.
Empty the tank if you are not going to use the product for an extended period of time (more than 30 days) and before storing it for
the winter.
Always remove the battery pack from the engine and charge it before storage.
Transport
Switch the product off and disconnect the spark plug connector / remove the battery pack.
Adjust the cutting height to the highest position as described above.
Attach transportation guards, if applicable.
Always transport the product by its handle (1).
Protect the product from any heavy impact or strong vibrations which may occur during transportation in vehicles.
Secure the product to prevent it from slipping or falling over, loss of fuel, damage or injury.
