19
In
more
detail...
GB
IE
MSSD36T-Li
by MacAllister
Product functions
Handle position
This product has two handle positions for optimum performance in different work
location. The pistol position provides a firm grip for those jobs where more torque
is required. The rod position suits narrow working areas.
Torque adjustment
By rotating the torque adjustment collar (9) behind the chuck, it is possible to
adjust the output torque to each of seven settings. The range of seven torque
settings allows better control when using as it prevents overtightening of the
screws.
The numbers circling the collar are used to indicate the level of torque.
The higher number on the collar, the higher torque and the larger
fastener can be driven. To select any of the numbers, rotate the
collar (9) until the desired number aligns with the arrow head
indicator on the housing.
To change to rod position, press and hold the unlock button (6) and rotate
the handle (4) clockwise at the same time until it locks in place (Fig. 8).
To change to pistol position, press and hold the unlock button (6) and rotate
the handle (4) anti-clockwise at the same time until it locks in place (Fig. 9).
WARNING!
Only change the position when the product is switched off and has
come to a complete stop!
Always rotate the handle as far as it will go! Do not use the product with the
handle in any other intermediate position!
Make sure that the handle clicks in place. Never use the product if the handle
has not been fully locked!
6
6
4
4
Fig. 8 pistol position
Fig. 9 rod position
9
Fig. 10
