23
In
more
detail...
GB
IE
MSSD36T-Li
by MacAllister
Care and maintenance / Troubleshooting
Transportation
> Switch the product off.
> Attach transportation guards, if applicable.
> Always carry the product by its handle.
> Protect the product from any heavy impact or strong vibrations which may occur
during transportation in vehicles.
> Secure the product to prevent it from slipping or falling over.
Troubleshooting
Suspected malfunctions are often due to causes that the users can fix
themselves. Therefore check the product using this section. In most cases the
problem can be solved quickly.
WARNING!
Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed
by an authorised service centre or a similarly qualified specialist if you
cannot solve the problem yourself!
Problem
Possible Cause
Solution
1. Product does
not start
1.1 Battery discharged
1.2 Battery damaged
1.3 Other electrical defect to
the product
1.1 Charge battery
1.2 Check by a specialist
electrician
1.3 Check by a specialist
electrician
2. Product does
not reach full
power
2.1 Battery capacity too low 2.1 Charge battery
3. Unsatisfactory
result
3.1 Driver bit is worn
3.2 Driver bit not suitable for
intended operation
3.1 Replace with a new one
3.2 Use suitable driver bit