EN
28
Operation
In
more
detail...
MLM1834-Li
by MacAllister
EN
Starting/Stopping
Starting / stopping
NOTE:
The product can only be started by pressing the safety switch
button (2) followed by squeezing the start levers (3). Reverse operation
cannot start the product.
1. Install the battery pack (20) into the battery compartment.
2. Insert the safety key (10) into the slot fully (Fig. 17).
3. Stand behind the grip handle (1).
4. While holding the safety switch button (2) pressed (Fig. 18, step 1), pull the
start levers (3) towards the grip handle (1) (Fig. 18, step 2).
5. After the mower starts, release the safety switch button (2).
6. The product starts moving forward and begins mowing.
7. Release the start levers (3) to stop the mower.
10
Fig. 17.
1.
2.
2.
3
1
2
3
Fig. 18
Mowing
1.
Make sure that the lawn is clear of stones, sticks, wire or other objects that
could damage the product or its product.
2.
Do not cut wet grass because it tends to stick to the underbody of the product,
preventing the proper discharge of grass clippings, and it could also cause
you to slip and fall.
3.
Never cut off more than one-third of the total length of the grass for a healthy
lawn. In the autumn, lawns should only be cut as long as there is growth.
4.
Slowly push the product forward.
MNL_MLM1834-Li_18V 34cm Lawnmower_IM_GB_V1_211009.indd 28
10/9/21 10:58 AM
