EN
31
In
more
detail...
MLM1834-Li
by MacAllister
Care and maintenance
EN
5. Replace the cutting blade (12d) with a new one of the same type. Check the
status of flange (12c), the bushing (12b) onto the spindle (12a) firstly, then
attach the cutting blade (12d) and hex nut (12e) properly. Tighten the hex nut
(12e) clockwise with 20 Nm min, 25 Nm max. to ensure safe operation of your
product.
6. Replace this cutting blade after 50 hours mowing or 2 years whichever is
sooner regardless of condition. If the cutting blade is cracked or damaged,
you must immediately replace it with a new one.
7. Lubricate the cutting blade (12d) after each use to prolong the life span of
cutting blade and product. Apply light machine oil along the edge of the
cutting blade.
12e
12d
12c
12b
12a
Fig. 20
Grass catcher
1. Inspect the grass catcher (7) before each use. Do not use it if you find any
damage.å
2. Clean the grass catcher (7) after operation using water and mild soap.
3. Let the grass catcher (7) dry thoroughly before storing to avoid mildew.
Inter-connection cord
Check the inter-connection cord (18) before each use.
WARNING!
Do not use the product with a defective or a loose inter-
connection cord (18)!
Repair
This product does not contain any parts that can be repaired by the consumer.
Contact an authorised service centre or a similarly qualified person to have it
checked and repaired.
MNL_MLM1834-Li_18V 34cm Lawnmower_IM_GB_V1_211009.indd 31
10/9/21 10:58 AM
