EN
23
In
more
detail...
MLM3641-Li
by MacAllister
Cutting height adjustment
Product functions
WARNING!
Switch the product off and wait that the cutting blade had
come to a complete stop before adjusting the cutting height!
Remove the safety key (16) before adjusting the cutting height!
WARNING!
Ensure that the lever (10) engages in the slot after each
adjustment.
Grass catcher
WARNING!
Do not attempt to use the product without the grass
catcher attached when collecting grass – danger of flying objects!
Switch the motor off and wait that the blade had come to a complete
stop before removing the grass catcher!
Attach the grass catcher (6). Always carry the grass catcher (6) by its carry
handle (6a).
Adjust the cutting height according to the needs of your lawn. The cutting height
depends on the kind of lawn and its actual height. When mowing high grass,
start with the maximum cutting height and make a second cut with a lower cutting
height.
1. Pull the lever (10) towards the rear
wheel (11) (Fig. 13, step 1).
2. Move forward or backward to adjust
the cutting height (Fig. 13, step 2).
3. Release the lever (10) and ensure it
engaged in the slot properly (Fig. 13,
step 3).
11
10
1.
2.
3.
Fig. 13
Fig. 13
