EN
06
Getting
started...
MLM3641-Li
by MacAllister
18. If the product starts to vibrate abnormally (check
immediately)
- inspect for damage,
- replace or repair any damaged parts,
- check for and tighten any loose parts.
Maintenance and storage
1. Disconnect the product from the power supply (i.e.
remove the battery pack and / or safety key) before
checking, cleaning or working on the product and
when it is not in use.
2. Disconnect the product from the power supply (i.e.
remove the battery pack and / or safety key) before
carrying out maintenance or cleaning work.
3. Improper maintenance will lead to malfunction/failure
of the product.
4. Inspect and maintain the product regularly. Keep all
nuts, bolts and screws tight to be sure the product is
in safe working condition.
5. Check the grass catcher frequently for wear or
deterioration.
6. Be careful during adjustment of the product to
prevent entrapment of the fingers between moving
blades and fixed parts of the product.
7. Always allow the product to cool before storing.
8. When servicing the blades be aware that, even
though the power source is switched off, the blades
can still be moved.
9. Replace worn or damaged parts for safety. Use only
genuine replacement parts and accessories.
10. Wear strong work gloves when removing and
reassembling the cutting blade.
Safety warnings
Safety information
