85
note: never use a pen or sharp object to calibrate the touch screen as this will damage the panel.
1. Touch the Calibrate Start icon and the first screen will appear with instructions.
2. Follow the instructions on the screen touching and momentarily holding finger or a stylus to the
center of the target for 2 seconds. Repeat as the target moves to each corner of the screen
and finally to the center.
Calibration Screen
3. The second screen will appear:
Calibration Screen Confirmation
4. If the screen is touched, the new calibration parameters will be accepted. If the screen is not
touched within thirty seconds, the new parameters will be disregarded.
illumination:
Touch to access the Illumination screen. Touch a color to set the front panel display
to the selected color.
ui Color:
Touch green, red, amber, blue or purple to select the user interface color. Touch again to
confirm and set the color.
Demo:
Touch ON or OFF to turn the demonstration mode ON or OFF. The factory default setting is OFF.
tft Monitor Auto open
• If “TFT Open” is “Auto on” when the unit is turned on, the monitor automatically moves to the
viewing position.
• If “TFT Open” is “Auto off” when the unit is turned on, press the OPEN button on the front panel
to move the monitor into the viewing position.
• If “TFT Open” is set to “Manual”, the TFT will not close when the key is turned off.
rear View Camera:
Press “Mirror” to turn on the mirror function, press “Normal” to turn off.
