22
Lead the black rubber loop trough
the grommet of the leaf no. 3.
Then lead the black rubber loop
trough the grommet of the leaf no. 4.
Use the remaining free line to
secure the black rubber loop of
the inner container.
The Aegis SQ is now ready for
installation into the harness.
The connection of the Aegis SQ to the harness shall be made due following the
recommendations of the harness manufacturer (Harness manual).
The riser of the Aegis SQ should be connected to the suspension point of the harness.
For the connection of the handle there are three loops on the outside face of the inner
container.