MACTOOLS.CO.UK
2
INTRODUCTION
The
Mac Tools™ MTPROG
is a precision-built jump starter, designed for professionals. This jump starter will deliver efficient,
dependable service when used correctly and with care. As with any professional jump starter, for best performance the manufacturer’s
instructions must be followed. Please study this manual before operating the device and understand the safety warnings and
instructions. The instructions on installation, operation and maintenance should be read carefully, and the manual kept for reference.
NOTE: Additional safety measures may be required because of your particular application of the device.
Contact your
Mac Tools
representative or distributor with any questions concerning the device and its use.
www.mactools.co.uk
Mac Tools • 210 Bath Road • Slough Berkshire, SL1 3DY, UK +44 (0) 114 2917266
TABLE OF CONTENTS
Introduction 2
Important Safety Instructions
3
Personal Precautions
3
Specifications 4
Preparing to Use the Jump Starter
4
Jump Starter Location
4
Charging the Internal Battery
5
Operating Instructions
5
Fuse Replacement
6
Maintenance Instructions
6
Moving and Storage Instructions
7
Troubleshooting 7
Accessory/Replacement Parts
7
Customer Service
8
Warranty 8
WARNING
IMPORTANT SAFETY INFORMATION ENCLOSED.
READ THIS MANUAL BEFORE OPERATING THE MACHINE.
SAVE FOR FUTURE REFERENCE
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
Always wear eye protection.
Always wear protective gloves.
CONTAINS SEALED NON-SPILLABLE LEAD-ACID
BATTERY. MUST BE DISPOSED OF PROPERLY.
WARNING: Possible explosion hazard. Contact
with battery acid may cause severe burns and
blindness. Keep out of reach of children.
