www.mac-srl.it
4
00_Avvertenze-02 200221
GBR
The personnel must use the required D.P.I. in these environments of working.
D.P.I. FOR THE OPERATOR
Pictogram
Description
SHOES
PROTECTION
GLOVES
SUITABLE
CLOTHES
GLASSES /
GLASSES FOR
WELDING
WARNING
• To do a correct installation of the product, is important to read and follow the instructions below carefully.
• The company MAC s.r.l descends any responsibility in the case the manual is not updated.
• In case of manual or components’ modifi cations, it is at discretion of the customer to ask about them.
• It is not allowed reproducing partially or publishing this document without the authorization of the company MAC
S.r.l..
• Any infraction will be prosecuted in accordance with the procedure prescribed by law.
• MAC s.r.l. is exclusive owner of its registered trademark. The brand is affi xed on labels with CE conformity and
on seals and danger adhesives.
• The removal, cancellation or modifi cation of the label MAC s.r.l. is strictly forbidden.
• An improper installation or use of the product may cause damage to people. Everything not expected in these
instructions is not allowed.
• The user must abstain from any attempt to repair or direct intervention. Furthermore, the user must only call
qualifi ed and authorized staff .
• The transit on the bollard must only occur when the device is completely lowered and the traffi c light is green.
• Keep out of reach of children remote controls or any other device of control in order to avoid the accidental
activation of the automation.
SHIPPING
• All the products are accurately checked and tested by the manufacturer before the shipping.
• At the moment of delivery, check if the bollard has been damaged during the transport. Moreover, check that
nothing has been rigged or removed. In case of noticing damages or missing parts, warn the courier and the
manufacturer sending them related photo documentation.
WASTE DISPOSAL
• MAC s.r.l recommends to respect the environment by promoting recycling waste.
• All the components must be disposed following the regulations of the installation’s place.
• Battery, electric and electronic elements may contain noxious and polluting substances. That components must
be removed and consigned to companies specialized in recycling noxious waste as indicated in the directive
2012/19/UE.
TRANSPORT AND LIFTING
• The transport and lifting of the bollard must occur with specifi c equipment and in compliance with safety regulations
in force in the area of the product’s installation and by expert staff .
• Check the effi ciency and the payload of the transportation before to proceed with the bollard’s movement.
• To not cause damages to people or to materials it is necessary to implement any possible precaution. It is
opportune to avoid abrupt movements that may ruin the bollard and cause damages to things or people.
• To lift the bollard or its parts, are needed means of transport with a minimum load larger than the declared weight.
These means of transport must have the CE label with the related certifi cates in force, like cables and lifting
eyebolts.
• To have a better load stability, it is necessary to keep the load as low as possible during the movements.
• Make sure that there are no people not involved in the work nearby during the installation and its operation.
