Istruzioni-HCMMMTTT-09022023 (Cod.620100007 Rev.16) EsEng (USA) MAC3.doc
11
4.3.2
HC Advanced (multi bombas - multi pumps)
ES
Conecte los cables de comunicación y alimentar a todos
los equipos del grupo, después de 2 segundos, se mostrará
la presentación en pantalla.
EN
Connect the communication cable and power all the
HCs of the group and in 2 seconds it will be displayed.
HCW/TT 19/09/09
**By MAC3 SpA**
ES
Pulse el botón
+
para iniciar la instalación rápida.
Pulse el botón
✓
si la configuración rápida ya está hecha.
EN
Press + to start the procedure of installation.
Press
✓
to start the system without doing installation.
Instalación (+)
Inicio (Enter)
Installation (+)
Start (Enter)
Elegir con + o -
Guardar con ENTER
Choose with + & -
Save with ENTER
ES
Proceder a instalar un dispositivo, que se convierte en el
maestro de grupo.
Mostra
Idioma
a. Con los botones
+
o
-
vaya a la aparición del lenguaje.
b. Pulse la tecla
✓
, mantenga presionada la tecla hasta
que aparezca el mensaje "Configuración ..." y no otro..
EN
Proceed with the installation of a single device, which
becomes the group master
Displayed
Language
a. Press
+
or
–
to change the language.
b. Pressing
✓
, the value is saved in memory. Keep
pressed
✓
till it
will be displayed “Done.…………”
Idioma
Español
Language
English
I
Configuración del ID de red:
a. Con los b o - seleccionar el inverter ID:
MASTER (por defecto). 1 a 7 son los ESCLAVOS.
b. Pulse la tecla
✓
, mantenga presionada la tecla hasta
que aparezca el mensaje "Configuración ..." y no otro
EN
Displayed Net Config ID:
a. Press + or
– to select the ID for Hydrocontroller:
MASTER(default), 1-7 = Slave.
b. Press
✓
, and keep pressed till it will be displayed
“Done.…………”.
Config. Red ID
MASTER
Net Config ID
MASTER
ES
Potencia del motor
a. Con los b o - entrar en el valor de la energía
eléctrica de la placa de características del motor (P1)
b. Pulse la tecla
✓
, mantenga presionada la tecla hasta
que aparezca el mensaje "Configuración ..." y no otro.
EN
Displayed Motor Power
a. Press + or
– set the value of electric power written on
pumps label (P1)
b. Press
✓
, and keep pressed till it will be displayed
“Done.…………”.
Potencia Motor
1500 Watt
Motor Power
2 hp
ES
Mostra MAX.Corr.Motor
a. Pr o - para establecer el valor de la corriente
nominal de la electrobomba incrementada en un 10%
(se recomienda verificar la corriente máxima real de la
bomba)
EN
Displayed MAX.Motor Current
a. Press + or
– to set the value of the electro-pump’s
rated current increased by 10%.(it is advisable to check
the real max. current of the pump)