Istruzioni-HCMMMTTT-09022023 (Cod.620100007 Rev.16) EsEng (USA) MAC3.doc
18
5.4
Características Técnicas - Techincal Features MT Standard/Advanced
Alimentación Monofasica
230 Vac 50/60 Hz
(de 170 a 270 Vac)
Single Phase Supply
230 Vac 50/60 Hz
(from 170 to 270 Vac)
Potencia de entrada (P1)
230 Vac monofasica
Vers. HC 3hp = 3,3 KW Max
Absorbed power (P1)
230Vac single phase
Vers.HC 3hp = 3.3 KW Max
Potencia max.
Electrobomba (P2)
230Vac trifàsico
Vers.HC 3hp=2,2kW
230 Vac trifásico
∆
Pump max. Power
230Vac three phase
(P2)
Vers.HC 3hp=2,2kW
230 Vac ThreePhase ∆
Max. corriente de fase
Vers.HC 3hp = 10A
Max. Phase current
Vers.HC 3hp = 10A
Frecuencia de salida
10 ÷ 100 Hz
Output frequency
10 ÷ 100 Hz
Tiempo de aceleración
Tiempo de desaceleración.
1 ÷ 10 sec
1 ÷ 10 sec
Acceleration time
Deceleration time.
1 ÷ 10 sec
1 ÷ 10 sec
Pantalla
LCD de 2 líneas x 16
caracteres
Display
LCD 2 lines x 16 characters
Posicion de Montaje HCW
Posicion de Montaje HCA
Cualquier tubería en
Vertical - en el aire libre
HCW assembly pos.
HCA assembly pos.
Any on piping
Vertical - in free air
Ajuste de la presión
0,3 ÷ 7,5 Bar (vers. HCW)
0,3 ÷ 10 Bar (vers. HCA con
transductor standard)
0,3 ÷ 25 Bar (versión HCA con
sensor opcional)
Pressure to be set
0,3 ÷ 7,5 Bar (vers. HCW)
0,3 ÷ 10 Bar (vers. HCA with
standard sensor)
0,3 ÷ 25 Bar (vers. HCA with
optional sensor)
Sobrepresión máxima para
el modelo HCW
12 Bar
Max overpressure
For HCW models
174 Psi
Temperatura ambiente de
funcionamiento
5°C ÷ +40 °C
Operating ambient
Temperature
41°F ÷ 104 °F
Grado de Protección
Ver la etiqueta del producto
Protection category
In Label product
Entrada / salida para los
modelos HCW
1” ¼ Hembra
Input/output for HCW
models
1” ¼ female
Dimens. HCW h/l/p
Dimens. HCA h/l/p
170/190/360 mm.
190/260/400 mm.
Dimens. HCW h/l/p
Dimens. HCA h/l/p
6,7/7.48/14.1 inch.
7.5/10.2/15.7inch.
Peso HCW
Peso HCA
3 Kg.
6 Kg.
Weight HCW
Weight HCA
6,6 lb.
13,2 lb.