Istruzioni-HCMMMTTT-09022023 (Cod.620100007 Rev.16) EsEng (USA) MAC3.doc
28
6.3
HC Advanced MM-MT-TT(6A-11A)
ES
I La versión avanzadade los modelos HC se su ministra
con una tarjeta de expansiòn para:
•
relè de alarma (para anomalías eléctricas e hidráulicas)
•
relè de arranque
•
Entrada ON/OFF para encender o apagar la bomba
mediante un comando externo (por ejemplo, interruptor de
flotador de funcionamiento en seco u otro contacto limpio).
El cierre del contacto permite activar el inversor.
•
entrada sensor tèrmico motor
•
Entrada para el flotador para indicación de nivel de agua
bajo
•
control areas de riego (con dispositivo MULTIPRESS u
otro dispositivo compatible)
•
comunicación
con
otros
unidades
hydrocontroller
•
comando de la bomba de segunda velocidad fija (modo
booster).
EN
The advanced version for models HC is supplied
with an expansion board for:
•
Alarm relay (for electrical and hydraulic anomalies)
•
Running relay
•
ON / OFF input to switch the pump on or off using an
external command (eg dry running floatswitch or
other clean contact). Closing the contact allows the
inverter to be activated
•
Input for motor thermal
•
Input for floatswitch for indicating low water level
•
Irrigation zones control (by device MULTIPRESS or
other compatible device)
•
Connection with other Hydrocontrollers (multipump
mode)
•
Command for second fixed speed pump (booster
mode)
J5
J8
R1
GND
GND Sensor
GND Sensor
REMOTO
Flotador
Floatswitch.
Max 5A 250Vac - Max 5A 30 Vdc
NO
R1 Config.NO
Config. R1 NO
SENS
Salida
sensore
4÷20mA
output sensor
4÷20mA
REMOTO
Flotador
Floatswitch.
NC
R1 Config. NC
Config. R1 NC
INVERTER
OFF
ON
C
R1 Config. C
Config. R1 C
+
Alimentacion
sensor
4÷20mA
(12Vdc)
Power supply
sensor
4÷20mA
(12Vdc)
PLACA MADRE
MOTHER BOARD
R1
J5
J8