Istruzioni-HCMMMTTT-09022023 (Cod.620100007 Rev.16) EsEng (USA) MAC3.doc
8
4.3.1
HC STANDARD (1 bomba - single pump)
ES
Dar corriente al aparato y después de 2 segundos,
muestra la presentación en pantalla..
EN
Power the HC and in 2 seconds it will be displayed.
HCW/TT 19/09/09
**By MAC3 SpA**
ES
Pulse el botón
+
para iniciar la instalación rápida.
Pulse el botón
✓
si la configuración rápida ya se ha
realizado..
EN
Press + to start the procedure of installation.
Press
✓
to start the system without doing installation.
Instalación (+)
Inicio (Enter)
Installation (+)
Start (Enter)
o -
Guardar con ENTER
Choose with + & -
Save with ENTER
ES
Mostra
Idioma
a. Con los botones
+
o
-
vaya a la aparición del lenguaje..
b. Pulse la tecla
✓
, mantenga presionada la tecla hasta
que aparezca el mensaje "Configuración ..." y no otro.
EN
Displayed
Language
a. Press
+
or
–
to change the language.
b. Pressing
✓
, the value is saved in memory. Keep
pressed
✓
till it will be displayed “Done.…………”
Idioma
Español
Language
English
ES
Potencia motor
mostrada
a. Presione + o - establezca el valor de energía eléctrica
escrito en la etiqueta de las bombas (P1)
b. Presione
✓
, y manténgalo presionado hasta que
aparezca " Configuración."
EN
Displayed
Motor Power
a. Press + or
– set the value of electric power written on
pumps label (P1)
b. Press
✓
, and keep pressed till it will be displayed
“Done.…………”.
Potencia Motor
1500 Watt
Motor Power
1500 Watt
ES
Mostra MAX.Corr.Motor
a. Pr o - para establecer el valor de la corriente
nominal de la electrobomba incrementada en un 10%
(se recomienda verificar la corriente máxima real de la
bomba)
Ej: MAX Corriente del motor 10 A = 11 amperios a fijar
en el variador
b. Pulse la tecla
✓
, mantenga presionada la tecla hasta
que aparezca el mensaje "Configuración ..." y no otro
EN
Displayed MAX.Motor Current
a. Press + or
– to set the value of the electro-pump’s
rated current increased by 10%.(it is advisable to
check the real max. current of the pump)
Es: MAX Motor Current 10 A = 11 Ampere set
b. Press
✓
, and keep pressed till it will be displayed
“Done.…………”.”
Max.Corr. Motor
7,5 Amperios
Max.Motor Current
7,5 Ampere