17
MCS2400
by MacAllister
In
more
detail...
GB
IE
Operation
General operation
To become proficient attend a recognised chain saw training
>
course to learn how to operate chain saws safely and effectively.
Familiarise yourself with all the controls and switches. Practise
all movements with the product switched off.
Always hold the product firmly with both hands. Hold the front
>
grip with your left hand and the rear grip with your right hand.
Fully grip both handles at all times during operation. Never
operate the product using only one hand.
Ensure the power cord is located
>
to the rear, away from the chain
and the wood and is positioned
so that it cannot be caught on
branches or similar objects during
cutting.
Only use the product with a
>
secure stance. Hold the product
to the right-hand side of your
body (Fig. 19).
Fig. 19
Basic operating / cutting procedure
Check the product, its power cord and plug as well as accessories
>
for damage before each use. Do not use the product if it is
damaged or shows wear.
Double check that accessories and the guide bar/saw chain are
>
properly fixed.
Always hold the product by its handle. Keep the handle dry to
>
ensure safe support.
Ensure that the air vents are always unobstructed and clear.
>
Clean them if necessary with a soft brush. Blocked air vents may
lead to overheating and damage the product.
Switch the product off immediately if you are disturbed while
>
working by other people entering the working area. Always let
the product come to complete stop before putting it down.
Do not overwork yourself. Take regular breaks to ensure you can
>
concentrate on the work and have full control over the product.
MNL_MCS2400_DFT_GB_V05_111108.indd 17
11/8/11 5:17:33 PM
