08
MCS2400
by MacAllister
Before you start
Getting
started...
GB
IE
Assembly
Set the product on a suitable flat surface.
>
Turn the tension wheel (8) until the chain
>
“tie straps” are just touching the bottom
edge of the guide bar (4) (Fig. 6).
Check the chain tension using one hand
>
to lift the saw chain (3) against the weight
of the product. The correct chain tension is
achieved when the saw chain can be lifted
by approximately 2 - 4 mm from the guide
bar (4) in the centre (Figs. 7, 8).
8
4
7
Fig. 6
2-4 mm
Fig. 7
Fig. 8
Turn the locking wheel (7)
>
clockwise to tighten the cover
(9) completely (Fig. 9).
a
b
7
Fig. 9
MNL_MCS2400_DFT_GB_V05_111108.indd 8
11/8/11 5:17:19 PM