background image

2

 

3

GENERAL SAFETY INSTRUCTIONS

WARNING. 

Read all instructions. Failure to follow all 

instructions listed below may result in electric shock, 

fire and/or serious personal injury. The term “power 

tool” in all of the warnings listed below refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

SAVE THESE INSTRUCTIONS

1)   WORK AREA

  a)    Keep work area clean and well lit. 

Cluttered and 

dark areas invite accidents.

 

b)    Do not operate power tools in explosive 

atmospheres, such as in the presence of 

flammable liquids, gases, or dust.

 Power tools 

create sparks which may ignite the dust or fumes. 

 

c)    Keep children and bystanders away while 

operating a power tool.

 Distractions can cause 

you to lose control.

2) ELECTRICAL SAFETY

 

a)    Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power 

tools.

 Unmodified plugs and matching outlets will 

reduce risk of electric shock.

  b)    Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges 

and refrigerators.

 There is an increased risk of 

electric shock if your body is earthed or grounded.

 

c)    Do not expose power tools to rain or wet 

conditions.

 Water entering a power tool will 

increase the risk of electric shock.

  d)    Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges 

or moving parts.

 Damaged or entangled cords 

increase the risk of electric shock.

 

e)    When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

 Use of 

a cord suitable for outdoor use reduces the risk of 

electric shock.

3)  PERSONAL SAFETY

   

a)    Stay alert, watch what you are doing and 

use common sense when operating a power 

tool. Do not use a power tool while you are 

tired or under the influence of drugs, alcohol, 

or medication.

 A moment of inattention while 

operating power tools may result in serious 

personal injury.

 

b)    Use safety equipment.

 

Always wear eye 

protection. 

Safety equipment such as a dust 

mask, non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will 

reduce personal injuries.

 

c)    Avoid accidental starting. Ensure the switch is 

in the off-position before plugging in.

 Carrying 

power tools with your finger on the switch or 

plugging in power tools that have the switch on 

invites accidents.

 

d)    Remove any adjusting key or wrench before 

turning the tool on.

 A wrench or a key that is left 

attached to a rotating part of the power tool may 

result in personal injury.

 

e)    Do not overreach. Keep proper footing and 

balance at all times.

 This enables better control 

of the power tool in unexpected situations.

 

f)    Dress properly. Do not wear loose clothing 

or jewellery. Keep your hair, clothing, and 

gloves away from moving parts.

 Loose clothes, 

jewellery or long hair can be caught in moving 

parts.

 

g)    If devices are provided for the connection of 

dust extraction and collection facilities, ensure 

that these are connected and properly used.

 

Use of these devices can reduce dust-related 

hazards.

4)  POWER TOOL USE AND CARE

 

a)    Do not force the power tool. Use the correct 

power tool for your application.

 The correct 

power tool will do the job better and safer at the 

rate for which it was designed.

 

b)    Do not use the power tool if the switch does 

not turn it on and off.

 Any power tool that cannot 

be controlled with the switch is dangerous and 

must be repaired.

 

c)    Disconnect the plug from the power source 

before making any adjustments, changing 

accessories, or storing power tools.

 Such 

preventive safety measures reduce the risk of 

starting the power tool accidentally.

 

d)    Store idle power tools out of the reach of 

children and do not allow persons unfamiliar 

with the power tool or these instructions 

to operate the power tool.

 Power tools are 

dangerous in the hands of untrained users.

 

e)    Maintain power tools. Check for misalignment 

or binding of moving parts, breakage of parts, 

and any other condition that may affect the 

power tools operation. If damaged, have the 

power tool repaired before use.

 Many accidents 

are caused by poorly maintained power tools.

 

f)    Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges 

are less likely to bind and are easier to control.

 

g)    Use the power tool, accessories and tool bits 

etc., in accordance with these instructions and 

in the manner intended for the particular type 

of power tool, taking into account the working 

conditions and the work to be performed. 

Use 

of the power tool for operations different form 

intended could result in a hazardous situation.

5) SERVICE

 

a)    Have your power tool serviced by a qualified 

repair personnel using only identical 

replacement parts. 

This will ensure that the 

safety of the power tool is maintained. 

ADDITIONAL SAFETY RULES FOR ROTARY 

MOWERS

•   Only use this Lawn Mower when a Residual Current 

Device (RCD) with a tripping current of not more than 

30mA is in the circuit.

•   If an extension cord is used make sure it is for outdoor 

use and marked as such. The recommended size 

of extension cord is not lighter than 1.5mm

2

 and a 

maximum of 10 metres in length.

•   Completely uncoil your extension cable before use 

to prevent overheating and loss of mower efficiency. 

When tidying away the cable, wind it carefully to avoid 

kinking. 

WARNING

. After switching off the machine, the cutting 

blade continues to rotate for a few more seconds.

•   Frequently inspect the condition of the cutting blades. 

Damaged blades must be replaced immediately. Blunt 

blades should be sharpened. Follow all the required 

precautions when replacing the blades.

•   Before use check the supply and extension cord 

for signs of damage or ageing. If the cord becomes 

damaged during use, disconnect the cord from the 

supply immediately. DO NOT TOUCH THE CORD 

BEFORE DISCONNECTING THE SUPPLY.

•   Do not use the appliance if the cord is damaged or 

worn.

•   Read the instructions carefully. Be familiar with the 

controls and proper use of the equipment.

•   Keep extension cord away from cutting blades.

•   Wear eye and ear protection. Wear dust protection 

if the mowing action causes the raising of dust or 

particles.

•   Never allow children, infirm people or people 

unfamiliar with these instructions to use the rotary 

collect mower.

•   Avoid using the mower, while people, especially 

children and the infirm, or pets are nearby.

•   Use the mower only in daylight or good artificial light.

•    Do not operate the mower unless the grass box is in 

place.

•   Never operate the mower with a damaged base.

•   Never operate the appliance with defective guards 

or shields, or without safety devices, for example 

deflectors and/or grass catcher, in place. 

•   When starting up and when the machine is in 

operation, keep the cutting section away from all parts 

of the body, especially the hands and feet.

•   Do not start the machine when it is not in the operating 

position.

•   Thoroughly inspect the mower for loose or damaged 

parts before each use. Do not use the unit until 

adjustments or repairs are made.

•   Use only the manufacturer’s recommended 

replacement parts and accessories.

•   Always disconnect the mower from the mains when 

leaving it unattended.

•   Switch the motor off and pull out the plug when the 

machine is not being used, being cleaned, being 

moved from one place to another or when the blades 

are being changed or adjusted.

•   If there is an interruption to the power supply or the 

extension cable is damaged, switch off the machine 

immediately and remove the plug from the power 

point.

•   Inspect and maintain the mower regularly. Have the 

mower repaired only by an authorised repairer.

•   If power cord is damaged, only have it repaired or 

replaced by an authorised service centre.

•   Check that all grass cuttings and dirt have been 

removed from the ventilation vents.

•   When not in use, store the mower out of the reach of 

children and infirm people. 

WARNING

.  In order to reduce the risk, disconnect the 

plug from the supply power, only use recommended 

accessories as required, otherwise personal injury may 

result.

•   Do not use the machine to cut grass which is not on 

the ground. For example, do not cut grass which is on 

rocks.

•   Do not switch on the machine in enclosed or poorly 

ventilated spaces or in the presence of inflammable 

and/or explosive substances such as liquids, gasses 

and powders.

•   Always stop the mower and switch off at the mains 

when cutting is delayed, emptying the grass box or 

when walking from one cutting location to another.

•   Do not cross roads or gravel paths with the machine 

still running.

•   Do not move the machine by pulling on the electrical 

cable. Always use the handgrip.

•   Keep a balanced and stable stance while using the 

machine.

•   Ensure that the area being cut is free from strings, 

stones and debris. Remove any objects that could be 

thrown during cutting or could wind around the cutting 

mechanism.

•   If you hit or become entangled with a foreign object, 

stop the motor and disconnect from the mains 

immediately to check for damage. Repair any damage 

before further operation is attempted. Do not operate 

the mower with loose or damaged parts.

•   Do not cut against hard objects. This could cause 

injury to the operator and damage to the machine.

•   Keep your hands, face and feet away from all moving 

parts.

•   If possible, avoid cutting wet grass.

•   Exercise proper caution when mowing on sloping 

ground. Watch your footing and wear non-slip 

footwear. Mow along the slope not up and down it. Do 

not mow on steep slopes. Be especially cautious when 

changing direction on slopes – stand above the mower 

to avoid risk of injury.

•   Never operate the mower barefoot or when wearing 

open sandals or canvas shoes.

•   Do not mow by pulling the machine towards you.

•   When mowing, keep the cable away from the mower. 

Your direction of work should be away from the power 

point. Mow in straight lines, not in circles.

•   Always keep hands and feet away from rotating parts.

•   When the machine is not in use, store it in a dry, and 

high or locked-up place, out of reach of children.

•   Check the grass catcher frequently for wear or 

deterioration.

•   After use, disconnect the machine from the power 

supply and check for damage. If you have the slightest 

doubts, check with an authorised service centre.

•   Only use the machine according to the instructions 

given in this manual.

III - Safety instructions

Summary of Contents for MAC1700RMA










Reviews: