Note
Ports and connector mapping on MACCHIATObin revisions 1.2 and older can be seen
below:
For a mode in-detail overview of the on-board DIP switches and the pin out information of
the connectors, please see Ports and Interfaces.
Prerequisites
Here is what you will need to power up the Single Shot or Double Shot MACCHIATObin
boards:
Linux or Windows PC
12V power adapter (TODO: add notes on which prerequisites are included in the
package as well as notes on what is included with Double Shot compared to Single
Shot)
micro USB cable
IP router or IP switch
USB 3.0/2.0 Flash disk (optional)
2/7
