UNLOADING AND ASSEMBLY
Form # 169078
Model Year - 2009
15
STEP 13 INSTALL FORMING
SHIELD
a. Remove the header from the tractor if attached
for ease of installation of the forming shield.
b. Install bolt (A) with spacer (B), and nut on each
leg in the upper hole. Hardware is supplied with
forming shield kit.
c. Remove the two clevis pins (C) from forming
shield forward end.
d. Position forming shield under the tractor frame.
e. Locate forming shield onto bolts (A) in tractor leg
and secure with clevis pins (C) and hairpin.
f. Lift the aft end of the forming shield and attach
straps (D) to pins (E) on tractor frame. Install
washer and hairpin to secure strap. Use the
middle hole and adjust height to suit the crop.
g. Set forming shield side deflectors to desired
width by repositioning adjuster bars (F). Use
same hole location on both sides.
h. Adjust fluffer shield (G) to middle position.
Loosen handles (H) if required.
A
B
C
C
A
D
E
G
H
F
BOTH SIDES
