UNLOADING AND ASSEMBLY
Form # 169078
Model Year - 2009
20
i. Move tractor left side platform to open position
to expose hydraulic valve blocks.
j. Install Velcro straps on tractor as follows if not
already installed.
1. Retrieve package of three Velcro straps
shipped with the header.
2. Locate Velcro strap (F) through slot and
under bracket (G) on hose support.
3. Attach strap to bracket with ½ inch carriage
bolt (H) and locking nut. Install bolt from
under bracket.
4. Repeat above steps at the two other
brackets on hose support.
k. Route auger return and reel pressure hose
bundle (D) from header to tractor, and locate
bundle above existing hose support (J) as
shown.
l. Secure with three straps (F) and lower lever (K).
M150 & M200 VALVE
BLOCK
CONNECTIONS
a. Route auger return and reel pressure hoses (D)
to valve block (A).
b. Remove the plugs from ports “R2” at locations
(B) and (C), on valve (A) or (A1). Ports may not
be identified.
(continued next page)
F
G
H
D
J
G
K
WITHOUT REVERSER VALVE
WITH REVERSER VALVE
B
C
R2
R2
B
C
R2
R2
A
A1
