214778
6
Revision A
1008902
A
B
C
Figure 2.2: Header Shipping Supports
3.
Approach one of the headers and slide forks (A) underneath
the shipping support (B) as far as possible without
contacting the shipping support of second header (C).
IMPORTANT:
Avoid lifting the second header and ensure the forks do not
interfere with the shipping frame. If the forks contact the
second header, the header could be damaged.
4.
Remove hauler
’
s tie-down straps, chains, and wooden
blocks.
5.
Slowly raise header off trailer deck.
WARNING
Be sure forks are secure before moving away from load. Stand
clear when lifting.
6.
Back up until header clears trailer and slowly lower to
150 mm (6 in.) from ground.
7.
Take header to the storage or setup area. Ensure ground is
flat and free of rocks or debris that could damage the
header.
8.
Repeat above steps for second header.
9.
Check for shipping damage and missing parts.