214778
31
Revision A
Chapter 4:
Assembling the Header
Perform all the procedures in this chapter in the order in which they are listed.
4.1
Positioning Transport Lights
Transport lights are located on each outboard reel arm. They are shipped in an inverted position on the inboard sides of
the reel arms.
1023878
B
A
Figure 4.1: Right Light Assembly in Shipping Position
1.
Remove lock nut (B) holding right light assembly (A) to reel
arm and remove light assembly. Retain lock nut.
1023569
A
B
Figure 4.2: Right Transport Light
2.
Position the right light assembly (A) perpendicular to right
reel arm and attach using retained lock nut (B).
NOTE:
Light assembly should rotate with normal hand force yet
maintain its position.
