214778
36
Revision A
1006380
A
Figure 4.12: Lifting the Reel
–
Double Reel Only
9.
For double reel only:
a.
Position sling (A) around the reel tube near the reel center
support arm.
b.
Lift reel to gain access to the center lift cylinder.
c.
Remove shipping wire and banding from center reel lift
cylinder.
1019106
A
B
Figure 4.13: Reel Arm Braces
10.
For double reel only:
a.
Remove 3/4 in. socket head bolt and 5/8 in. nut from
cylinder rod end. Retain hardware.
b.
Attach rod end of cylinder (B) to reel arm with socket head
bolt and nut (A). Access hardware through holes in reel arm
braces.
c.
Torque bolt and nut (A) to 54
–
61 Nm (40
–
45 lbf·ft).
d.
Remove pin at barrel end of cylinder.
e.
Adjust reel height so pin can be installed at barrel end of
cylinder and mounting structure.
1008131
A
Figure 4.14: Outboard Reel Arm
11. Reposition the sling (A) around reel tube near the opposite
outboard reel arm.
12. Remove shipping wire and banding from the reel lift
cylinder.
